6289 Corporate Drive
Loudon, TN 37774

865.458.8640( phone)
865.458.6754( fax)

E-mail
 
September, 2005
::: Dyna 300 Fat Tire
Our new Dyna 300 Fat Tire kit allows you to convert your current stock Dyna to a Super Fat 300MM Tire!



October, 2003
::: BB350

The new BB350 has more lead plates than before. It also has heavy internal connectors and seperators.



December, 2003
:::Dresser Fat Tire Kits

Dresser fat tire kit.



 

 

Fat Tire Kit Links: | Dresser | FXR | FX | Sportster | DYNA | Softail |
       
Dyna Fat Tire Kit
  1. (1) - Swing Arm
  2. (1) - Steel Rear Fender
  3. (1) - 3/4" Pulley Spacer
  4. (2) - 1/2" x 4 1/2" Top Shock Bolts
  5. (4) - 7/16" x 1" Fender Rail Bolts (Holes in the fender rails must be tapped to 7/16"-20)
  6. (2) - Axle Adjuster Plates
  7. (1) - 5 3/4" Jackshaft Bolt
  8. (1) - Inner primary spacer (Part # 700870)
  9. (1) - Engine Inner primary spacer (Part #236497)
  10. (1) - Clutch Pushrod (Part #700874)
  11. (2) - Mainshaft Bearings (Part #239900)
  12. (1) - Sprocketshaft Extension (Part #346211)
  13. (1) - 5th Gear Mainshaft (Part #700838)
  14. (1) - Sprocket Spacer (Part #700873)
  15. (1) - Trans Main Shaft (Part #700836)
  16. (1) - Inner Primary Emgine "O" Ring
  17. (1) - Set Inner Primary Bolts & Lock Tabs
  18. (1) - Set Gaskets (Part #700365)
  19. (1) - Primary Spacer, short (Part #700872)
  20. (1) - Primary Spacer, long(Part #700871)
  21. (1) -Inner Spacer starter jackshaft (Part #700888)
  22. (1) -Outer Spacer starter jackshaft (Part #700876)
  23. (4) - Fender Rail Spacers, 7/16" ID x 3/4" long
  24. (2) - Top Shock Bolt Spacers, 1/2" ID x 1.325" long
 
*240 DYNA FAT TIRE KIT INSTALLED
 
 


300MM PICS
 
 
HOME        ABOUT US      CONTACT US

Copyright 2003 BigBoarProducts. All rights reserved.

Hosting by Carolina Web Spinners Hosting web sites and registering domain names